Tarayıcınızda JavaScript'i devre dışı bırakmışsınız gibi görünüyor. Bu sayfadaki bazı işlevler giriş yapmadığınız sürece çalışmayacaktır.

Bir Hata mı Gördünüz?

CG33.3

Name: Littelfuse CG33.3
Brand: Littelfuse
SKU: 576-CG33.3
Price: 1.87 EUR
Availability: OutOfStock

Resimler sadece referans içindir
Ürün Teknik Özelliklerine Bakın

Mouser Numarası:

576-CG33.3

Ürt. Numarası:

CG33.3

Ürt.:

Littelfuse

Açıklama:

Gaz Tahliye Tüpleri - GDT'ler / Gaz Plazma Tutucular S.A. STAN 3.3KV

Veri Sayfası:

CG33.3 Veri Sayfası (PDF)

ECAD Modeli:

Bu dosyayı ECAD Aracınız için dönüştürmek için ücretsiz Library Loader dosyasını indirin. ECAD Model hakkında daha fazla bilgi edinin.

Daha Fazla Bilgi

Littelfuse CG33.3 hakkında daha fazla bilgi edinin

Stok Durumu

Stok:: Stokta Yok

Beklenmeyen bir hata oluştu. Lütfen daha sonra tekrar deneyin.
Fabrika Teslim Süresi:: 16 Hafta Fabrikada tahmini üretim süresi.

Miktar Girin:

Minimum: 1200 Çoklu: 1200

Birim Fiyat:

-,-- €

Toplam Fiyat:

-,-- €

Tahmini Gümrük Vergisi:

Bu Ürün ÜCRETSİZ Gönderilir

Fiyatlandırma (EUR)

Miktar	Birim Fiyat	Toplam Fiyat
	1,87 €	2.244,00 €

.hidden-for-nojs { display: none; } .pull-right-nojs { justify-content: flex-end; }

Ürün Niteliği	Öznitelik Değeri	Özellik Seçin
Üretici Firma:	Littelfuse
Ürün Kategorisi:	Gaz Tahliye Tüpleri - GDT'ler / Gaz Plazma Tutucular
RoHS:
Seri:	CG3
Tepe Darbe Akımı:	5 kA
DC Kıvılcım:	3.3 kV
Elektrot Sayısı:	2 Electrode
Sonlandırma Stili:	Axial
Güvenlik Koruması E/H:	Failsafe Not Protected
Çap:	8 mm
Uzunluk:	6 mm
Minimum Çalışma Sıcaklığı:	- 40 C
Maksimum Çalışma Sıcaklığı:	+ 90 C
Paketleme:	Bulk
Marka:	Littelfuse
Yalıtım Direnci:	10 GOhms
Montaj Stili:	SMD/SMT
Ürün Tipi:	GDTs - Gas Discharge Tubes / Surge Arresters
Fabrika Paket Miktarı:	1200
Alt kategori::	GDTs - Gas Discharge Tubes
Teknoloji:	Gas Discharge Tubes

Bulunan ürünler:

Benzer ürünleri göstermek için en az bir onay kutusu seçin

Bu kategorideki benzer ürünleri göstermek için yukarıda en az bir onay kutusu seçin.

Seçilen özellikler: 0

Belgeyi Filtrele:

Veri Sayfası

CG33.3 Veri Sayfası (PDF)

PCN

GDT Capacity Expansion (PDF)

Bu işlev için JavaScript'in etkinleştirilmesi gerekir.

CNHTS:: 8536300000
CAHTS:: 8535400000
USHTS:: 8535400000
JPHTS:: 853540000
KRHTS:: 8535400000
TARIC:: 8536301090
ECCN:: EAR99

Electrical Vehicle AC Chargers

Littelfuse provides a wide range of products that are suitable for Electric Vehicle AC Chargers. Although simpler in nature compared to DC chargers, AC charging stations safely deliver AC power from the electrical grid into the vehicle. Due to space and weight constraints in the vehicle, on-board chargers and AC charging stations are typically limited to lower amounts of power (22kW or less), which means charging time is slow – taking several hours. These systems also rely on a vehicle’s on-board charger to enable the conversion of AC power from the grid into DC power to charge the vehicle’s battery. It’s critical that proper measures are taken to safeguard both the charger and vehicle.

Off-Board Charger Sub-Unit Power Converters

Littelfuse Off-Board Charger Sub-Unit Power Converters are required for DC charging stations capable of charging to 80% SOC in under 30 minutes. These fast-charging applications require modular power converters, which can be paralleled to cater to different power levels, thereby enabling fast charging. The most critical parameters are energy density and system efficiency. A sub-unit power converter in a DC charging station consists of an AC/DC power stage and DC/DC power stage integrated into the charging station.

CG3 High-Voltage Gas Discharge Tubes

Littelfuse CG3 High-Voltage Gas Discharge Tubes (GDTs) are two-electrode, 1kV to 7.5kV devices designed for surge protection and high-isolation applications. Littelfuse CG3 GDTs are also designed for applications for which bias voltages or signal levels of several hundred volts are normally present. CG3 offers a low capacitance of <1.5pF and 5kA peak pulse current while operating over a -40°C to +90°C operating temperature range.

AC/DC Power Supply

Littelfuse AC/DC Power Supply is a commonly used building block in electronic designs. The components in these power supply building blocks need to be reliable and long-lasting, and Littelfuse offers a range of products that fit those requirements. This portfolio of components covers overcurrent and overvoltage protection, the power stage, and output protection. Typical applications for Littelfuse AC/DC Power Supply products include automotive, solar, industrial, manufacturing, and more.

xEV Power Train Solutions

Littelfuse offers a wide portfolio of xEV Power Train Solutions that are suitable for automotive environments. This portfolio includes fuses, TVS diodes, diode arrays, gate drivers, high-voltage fuses, and thermal protectors. These products from Littelfuse are designed to be used in various EV sectors, such as battery management systems, traction motor inverters, onboard chargers, and the battery distribution unit.

Electrical Vehicle DC Fast Chargers

DC charging stations are designed to convert the electrical grid’s AC power into DC power that can then be fed directly into a vehicle’s battery system for fast charging – in 30 minutes or less. Because the conversion from AC to DC power is being done in the charging station, these units can provide higher levels of power (50kW to 350kW and beyond) to the vehicle compared to AC charging stations. Working with tens to hundreds of kilowatts of power, efficient conversion, reliability of the system, and user safety are critical.

Off-Highway Electric Vehicle Solutions

Littelfuse provides a wide range of solutions for off-highway electric vehicles. These electric vehicles share a similar architecture and have a power range from 48V to 400V. Off-highway electric vehicles include electric forklifts, golf carts, three-wheelers, tow tractors, compactors, and excavators.