SN74AUP1G80DCKR1G4

Texas Instruments
595-SN74AUP1G80DR1G4
SN74AUP1G80DCKR1G4

Ürt.:

Açıklama:
Flip Floplar Low-Power Single Pos titive-Edge-Trigger

Yaşam Döngüsü:
Yeni Ürün:
Bu üreticiden yeni.
ECAD Modeli:
Bu dosyayı ECAD Aracınız için dönüştürmek için ücretsiz Library Loader dosyasını indirin. ECAD Model hakkında daha fazla bilgi edinin.
Bu ürünün Amerika Birleşik Devletleri'nden ihraç edilmesi için ek belgeler gerekebilir.

Stokta Var: 2.994

Stok:
2.994 Hemen Gönderilebilir
Fabrika Teslim Süresi:
12 Hafta Gösterilenden daha büyük miktarlar için fabrikada tahmini üretim süresi.
Minimum: 1   Çoklu: 1
Birim Fiyat:
-,-- €
Toplam Fiyat:
-,-- €
Tahmini Gümrük Vergisi:

Fiyatlandırma (EUR)

Miktar Birim Fiyat
Toplam Fiyat
0,946 € 0,95 €
0,581 € 5,81 €
0,488 € 12,20 €
0,371 € 37,10 €
0,321 € 80,25 €
0,281 € 140,50 €
0,252 € 252,00 €
Tam Makara (3000'in katları olarak sipariş verin)
0,216 € 648,00 €
0,189 € 1.134,00 €

Ürün Niteliği Öznitelik Değeri Özellik Seçin
Texas Instruments
Ürün Kategorisi: Flip Floplar
Gönderim Kısıtlamaları:
 Bu ürünün Amerika Birleşik Devletleri'nden ihraç edilmesi için ek belgeler gerekebilir.
RoHS:  
Inverting
AUP
1 Circuit
Push-Pull
SC-70-5
CMOS
Positive
- 4 mA
4 mA
800 mV
3.6 V
SMD/SMT
- 40 C
+ 85 C
Reel
Cut Tape
Marka: Texas Instruments
Maksimum Saat Frekansı: 260 MHz
Giriş Satırı Sayısı: 1 Input
Çıkış Satırı Sayısı: 1 Output
Ürün Tipi: Flip Flops
Seri: SN74AUP1G80DCKR1G4
Fabrika Paket Miktarı: 3000
Alt kategori:: Logic ICs
Bulunan ürünler:
Benzer ürünleri göstermek için en az bir onay kutusu seçin
Bu kategorideki benzer ürünleri göstermek için yukarıda en az bir onay kutusu seçin.
Seçilen özellikler: 0

Bu işlev için JavaScript'in etkinleştirilmesi gerekir.

USHTS:
8542390090
TARIC:
8542319000
MXHTS:
8542399999
ECCN:
EAR99

SN74AUP1G80 D-Type Flip-Flop

Texas Instruments SN74AUP1G80 D-Type Flip-Flop is a single positive-edge-triggered D-type flip-flop. When data at the data (D) input meets the setup time requirement, the data is transferred to the Q output on the positive-going edge of the clock pulse. The clock triggering occurs at a voltage level and is not directly related to the rise time of the clock pulse. Following the hold-time interval, data at the D input can be changed without affecting the levels at the outputs. The Texas Instruments SN74AUP1G80 is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs when the device is powered down. This circuitry inhibits current backflow into the device, which prevents damage to the device.