THVD2450VDRCREP

Texas Instruments
595-THVD2450VDRCREP
THVD2450VDRCREP

Ürt.:

Açıklama:
RS-422/RS-485 Arayüz Entegresi Enhanced: 3V to 5.5V 50Mbps half-duple

Yaşam Döngüsü:
Yeni Ürün:
Bu üreticiden yeni.
ECAD Modeli:
Bu dosyayı ECAD Aracınız için dönüştürmek için ücretsiz Library Loader dosyasını indirin. ECAD Model hakkında daha fazla bilgi edinin.

Stok Durumu

Stok:
Stokta Yok
Fabrika Teslim Süresi:
12 Hafta Fabrikada tahmini üretim süresi.
Minimum: 5000   Çoklu: 5000
Birim Fiyat:
-,-- €
Toplam Fiyat:
-,-- €
Tahmini Gümrük Vergisi:
Bu Ürün ÜCRETSİZ Gönderilir

Fiyatlandırma (EUR)

Miktar Birim Fiyat
Toplam Fiyat
Tam Makara (5000'in katları olarak sipariş verin)
14,08 € 70.400,00 €

Ürün Niteliği Öznitelik Değeri Özellik Seçin
Texas Instruments
Ürün Kategorisi: RS-422/RS-485 Arayüz Entegresi
THVD2450V
SMD/SMT
VSON-10
Transceiver
1 Driver
1 Receiver
20 Mb/s, 50 Mb/s
5.5 V
3 V
- 40 C
+ 125 C
Reel
Marka: Texas Instruments
Dubleks: Half Duplex
Neme Duyarlı: Yes
İşletim Besleme Voltajı: 3 V to 5.5 V
Çıkış Akımı: 60 mA
Çıkış Tipi: Differential
Çıkış Voltajı: 3.3 V
Ürün: RS-485 Transceiver
Ürün Tipi: RS-422/RS-485 Interface IC
Yayılma Gecikme Süresi: 720 ns, 1270 ns
Desteklenen Protokol: RS422, RS485
Kapanma: Shutdown
Fabrika Paket Miktarı: 5000
Alt kategori:: Interface ICs
Tip: Transceiver
Bulunan ürünler:
Benzer ürünleri göstermek için en az bir onay kutusu seçin
Bu kategorideki benzer ürünleri göstermek için yukarıda en az bir onay kutusu seçin.
Seçilen özellikler: 0

Bu işlev için JavaScript'in etkinleştirilmesi gerekir.

USHTS:
8542390090
TARIC:
8542399000
ECCN:
EAR99

THVD24x0 RS-422/RS-485 Transceivers

Texas Instruments THVD24x0 RS-422/RS-485 Transceivers are ±70V fault-protected, half-duplex transceivers operating on a single 3.0V to 5.5V supply. Bus interface pins are protected against overvoltage conditions during all modes of operation, ensuring robust communication in rugged industrial environments. The Texas Instruments THVD24x0 features integrated IEC ESD protection, eliminating the need for external system-level protection components. Extended ±25V input common-mode range guarantees reliable data communication over longer cable run lengths and/or in the presence of large ground loop voltages. Enhanced 250mV receiver hysteresis ensures high noise rejection. Also, the receiver fail-safe feature guarantees a logic high when the inputs are open or shorted together.

THVD24xV RS-422/RS-485 Transceivers

Texas Instruments THVD24xV RS-422/RS-485 Transceivers are half- and full-duplex RS-422/RS-485 transceivers that are ±70V fault-protected. These devices use a 3V to 5.5V bus-side supply and a 1.65V to 5.5V supply for the logic signal interface. These devices have a slew rate select feature that enables them to be used at two maximum speeds based on the SLR pin setting. The THVD24xVDRCR-EP devices have gold bondwires, a temperature range of -55 to 105°C, and include an SnPb lead finish.