TPS7H2211MDAPTSEP

Texas Instruments
595-TPS7H2211MDAPTSE
TPS7H2211MDAPTSEP

Ürt.:

Açıklama:
Hızlı Değişim Voltaj Kontrol Cihazları Radiation-tolerant 4.5-V to 14-V input 3.5-A eFuse

Yaşam Döngüsü:
Yeni Ürün:
Bu üreticiden yeni.
ECAD Modeli:
Bu dosyayı ECAD Aracınız için dönüştürmek için ücretsiz Library Loader dosyasını indirin. ECAD Model hakkında daha fazla bilgi edinin.

Stok Durumu

Stok:
0

Bu ürünü hâlâ tekrar siparişle satın alabilirsiniz.

Siparişte:
30
Minimum: 1   Çoklu: 1
Birim Fiyat:
-,-- €
Toplam Fiyat:
-,-- €
Tahmini Gümrük Vergisi:
Bu Ürün ÜCRETSİZ Gönderilir

Fiyatlandırma (EUR)

Miktar Birim Fiyat
Toplam Fiyat
598,47 € 598,47 €
594,24 € 5.942,40 €
Tam Makara (250'in katları olarak sipariş verin)
594,24 € 148.560,00 €

Ürün Niteliği Öznitelik Değeri Özellik Seçin
Texas Instruments
Ürün Kategorisi: Hızlı Değişim Voltaj Kontrol Cihazları
RoHS:  
Hot Swap Voltage Controllers
8 A
14 V
4.5 V
1 Channel
5 mA
- 55 C
+ 125 C
SMD/SMT
HTSSOP-32
Reel
Cut Tape
Yes
Marka: Texas Instruments
Geliştirme Kiti: TPS7H2211EVM
Giriş / Besleme Voltajı - Maks: 14 V
Giriş / Besleme Voltajı - Min: 4.5 V
Neme Duyarlı: Yes
Ürün Tipi: Hot Swap Voltage Controllers
Seri: TPS7H2211
Fabrika Paket Miktarı: 250
Alt kategori:: PMIC - Power Management ICs
Parça No Takma Adları: V62/23609-01XE
Bulunan ürünler:
Benzer ürünleri göstermek için en az bir onay kutusu seçin
Bu kategorideki benzer ürünleri göstermek için yukarıda en az bir onay kutusu seçin.
Seçilen özellikler: 0

Bu işlev için JavaScript'in etkinleştirilmesi gerekir.

USHTS:
8542390090
ECCN:
EAR99

TPS7H2211 Single Channel eFuse

Texas Instruments TPS7H2211 Single Channel eFuse includes an integrated FET load switch with additional features to provide reverse current protection, overvoltage protection, and a configurable rise time to minimize soft start and inrush current. The device contains P-channel MOSFETs that support a maximum continuous current of 3.5A and operate over an input voltage range of 4.5V to 14V.

LM5060 High-Side Protection Controllers

Texas Instruments LM5060 High-Side Protection Controllers with Low Quiescent Current offers intelligent control of a high-side N-channel MOSFET during normal on/off transitions and fault conditions. The constant rise time of the output voltage results from the inrush current control. Both an Input UVLO (with hysteresis) and a programmable input OVP are provided, with an enable input offering a remote on or off control. The initial start-up VGS fault detection delay time, the transition VDS fault detection delay time, and the continuous over-current VDS fault detection delay time is programmed from a single capacitor. The MOSFET is latched off until either the enable input, or the UVLO input is toggled low and then high when a detected fault condition persists longer than the allowed fault delay time.