AD7 Thermoset Chip Bonding Epoxy

Chip Quik AD7 Thermoset Chip Bonding Epoxy is designed to bond surface-mount chips and ICs to printed circuit boards (PCBs). The AD7 epoxy has low viscosity and is designed to be dot/line dispensed, allowing large and heavy surface-mount components to be permanently bonded to a PCB during reflow. This application enables two-sided mount reflow without larger chips or ICs coming loose. Curing time ranges from 120 to 180 seconds at the recommended curing temperature range of +190°C to +260°C. The maximum recommended dot size for Chip Quik AD7 Epoxy is 10mm x 10mm x 1mm.

Sonuçlar: 4
Seçin Resim Parça Numarası
 Ürt.
Açıklama Veri Sayfası Stok Durumu Fiyatlandırma (EUR) Tablodaki sonuçları sipariş verdiğiniz miktar uyarınca birim fiyata göre filtreleyin.
Miktar RoHS Ürün
Renk
Chip Quik Sıvı Dispenserleri ve Şişeleri Thermoset Chip Bonding Epoxy (Red) 10g/10cc syringe (Thermal (Heat) Cure Adhesive/Glue)
Veri Sayfası
22Stokta Var
Min.: 1
Çoklu.: 1

Syringes Red
Chip Quik Sıvı Dispenserleri ve Şişeleri Thermoset Chip Bonding Epoxy (Red) 30g/30cc syringe (Thermal (Heat) Cure Adhesive/Glue)
Veri Sayfası
34Stokta Var
Min.: 1
Çoklu.: 1

Syringes Red
Chip Quik Sıvı Dispenserleri ve Şişeleri Thermoset Chip Bonding Epoxy (Red) 5g/5cc syringe (Thermal (Heat) Cure Adhesive/Glue)
Veri Sayfası
56Stokta Var
Min.: 1
Çoklu.: 1

Syringes Red
Chip Quik Sıvı Dispenserleri ve Şişeleri Thermoset Chip Bonding Epoxy (Red) 200g/6oz cartridge (Thermal (Heat) Cure Adhesive/Glue)
Veri Sayfası
4Stokta Var
Min.: 1
Çoklu.: 1

Cartridge Red