BD18398AEUV-ME2

ROHM Semiconductor
755-BD18398AEUV-ME2
BD18398AEUV-ME2

Ürt.:

Açıklama:
LED Aydınlatma Sürücü IC'leri 3ch Current LED Driver with SPI for Automotive: BD18398AEUV-M is 3ch synchronous buck DC/DC LED driver with using on-time topology supporting near fixed switching frequency and fast switching duty regulation and with using average LED current feed bu

Yaşam Döngüsü:
Yeni Ürün:
Bu üreticiden yeni.
ECAD Modeli:
Bu dosyayı ECAD Aracınız için dönüştürmek için ücretsiz Library Loader dosyasını indirin. ECAD Model hakkında daha fazla bilgi edinin.

Ürün Niteliği Öznitelik Değeri Özellik Seçin
ROHM Semiconductor
Ürün Kategorisi: LED Aydınlatma Sürücü IC'leri
3 Output
Buck
2 A
HTSSOP-48
45 V
5 V
200 kHz to 2.25 MHz
2.5 V to 60 V
- 40 C
+ 125 C
Reel
Cut Tape
MouseReel
Marka: ROHM Semiconductor
Karartma: Analog, PWM
Özellikler: Thermal Shutdown
Giriş Voltajı: 5 V to 45 V
Neme Duyarlı: Yes
Montaj Stili: SMD/SMT
Kanal Sayısı: 3 Channel
Çıkış Tipi: Open Drain
Ürün: Current LED Drivers
Ürün Tipi: LED Lighting Drivers
Fabrika Paket Miktarı: 2000
Alt kategori:: Driver ICs
Besleme Akımı - Maks: 2.7 A
Tip: Current LED Driver
Bulunan ürünler:
Benzer ürünleri göstermek için en az bir onay kutusu seçin
Bu kategorideki benzer ürünleri göstermek için yukarıda en az bir onay kutusu seçin.
Seçilen özellikler: 0

Uyumluluk Kodları
USHTS:
8542390070
ECCN:
EAR99
Menşe Sınıflandırmaları
Menşe Ülke:
Tayland
Montaj Ülkesi:
Stokta yok
Dağıtım Ülkesi:
Stokta yok
Ülke, sevkiyat anında değişikliğe tabidir.

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

BD18398A Current LED Drivers

ROHM Semiconductor BD18398A Current LED Drivers are 2-ch/3-ch synchronous buck DC-DC LED drivers using on-time topology. These drivers support a near-fixed switching frequency and fast regulation of the switching duty cycle. These devices use an average LED-current feedback buck topology to achieve more accurate LED-current regulation across a wide input-to-LED output range. The BD18398A supports individual 10-bit analog dimming and 10-bit PWM dimming for LED current by programming the 10-bit register via SPI. The ROHM Semiconductor BD18398A will enter LIMP-HOME mode if SPI communication fails. In the LIMPHOME mode, individual LED currents can be set via the external pins and maintained when input power is applied, without SPI communication.

Optoelectronics

ROHM Semiconductor Optoelectronics offer a broad portfolio of display drivers, laser diodes, LEDs, LED displays, and optical sensors designed for use in a wide range of applications.

Stok Durumu

Stok:
0

Bu ürünü hâlâ tekrar siparişle satın alabilirsiniz.

Siparişte:
2.000
Beklenen 17.12.2026
Fabrika Teslim Süresi:
16
Hafta Gösterilenden daha büyük miktarlar için fabrikada tahmini üretim süresi.
Minimum: 1   Çoklu: 1
Birim Fiyat:
-,-- €
Toplam Fiyat:
-,-- €
Tahmini Gümrük Vergisi:
Paketleme:
Tam Makara (2000'in katları olarak sipariş verin)

Fiyatlandırma (EUR)

Miktar Birim Fiyat
Toplam Fiyat
Hazır Kesim Bant / MouseReel™ †
3,57 € 3,57 €
2,70 € 27,00 €
2,49 € 62,25 €
2,24 € 224,00 €
2,13 € 532,50 €
2,12 € 1.060,00 €
2,06 € 2.060,00 €
Tam Makara (2000'in katları olarak sipariş verin)
1,98 € 3.960,00 €
† 5,00 € MouseReel™ ücreti alışveriş sepetinize eklenecek ve hesaplanacaktır. MouseReel™ siparişleri iptal veya iade edilemez. ↩