REFILD8150EHETOBO1

Infineon Technologies
726-REFILD8150EHETOB
REFILD8150EHETOBO1

Ürt.:

Açıklama:
LED Aydınlatma Geliştirme Araçları

Yaşam Döngüsü:
Mouser'da Yeni

Stokta Var: 4

Stok:
4 Hemen Gönderilebilir
Minimum: 1   Çoklu: 1
Birim Fiyat:
-,-- €
Toplam Fiyat:
-,-- €
Tahmini Gümrük Vergisi:
Bu Ürün ÜCRETSİZ Gönderilir

Fiyatlandırma (EUR)

Miktar Birim Fiyat
Toplam Fiyat
89,28 € 89,28 €

Ürün Niteliği Öznitelik Değeri Özellik Seçin
Infineon
Ürün Kategorisi: LED Aydınlatma Geliştirme Araçları
RoHS:  
Reference Design Boards
ILD8150
8 V to 80 V
Marka: Infineon Technologies
Ürün Tipi: LED Lighting Development Tools
Alt kategori:: Development Tools
Parça No Takma Adları: REF_ILD8150E_HE SP006016130
Bulunan ürünler:
Benzer ürünleri göstermek için en az bir onay kutusu seçin
Bu kategorideki benzer ürünleri göstermek için yukarıda en az bir onay kutusu seçin.
Seçilen özellikler: 0

USHTS:
8542390090
MXHTS:
8542399999
ECCN:
EAR99

ILD8150E Reference Board

Infineon Technologies ILD8150E Reference Board (REF_ILD8150E_HE) shows how to enable voltage control in LED drivers by combining a DC-DC buck converter and an AC-DC flyback controller. This board features hybrid dimming from 0.5% to 100%, cycle-by-cycle current limit, and digital soft-start. The ILD8150E reference board requires no external MOSFET and is able to keep current under control. This board offers up to 1.5A output current and ±3% typical output current accuracy. The ILD8150E reference board is used in LED driver and LED lighting applications.

31FL323x LED Lighting Development Boards

ISSI 31FL323x LED Lighting Development Boards are development tools that evaluate ISSI multi-channel LED drivers. LED drivers are electrical circuits used to power light-emitting diodes. The fully assembled and tested board is powered by the Arm® Cortex®-M3 or 80C51 (IS31FL3235A-QFLS2-EB) with a 5V operating supply voltage. The evaluation boards have multiple display modes.

Development Tools

Infineon Development Tools offer a wide selection to enable the engineer's unique design, regardless of the target application. These range from LED lighting, power management, sensors, analog & digital ICs, communication, optoelectronic, and embedded development tools.

IS31LT3360 Demonstration Board

ISSI IS31LT3360 Demonstration Board is a fully assembled and tested PCB that uses the IS31LT3360 continuous mode inductive step-down converter. This ISSI board is designed to drive single or multiple series connected LEDs. This performance is achieved efficiently from a voltage source higher than the LED voltage.